Quick Update - September Events!

by FliteTest | September 4, 2013 | (10) Posted in News

We wanted to give you a quick update on the builds and events coming up in the next few weeks!

The FT Slinger build video and free plans are available here!

The official speed build kit name is the "FT Racer". The FT Racer and FT Duster will be available as speed build kits in our web store next Wednesday, Sept. 11th.

The reason for the delay with this speed build kit is because we will be attending Neat Fair! If you're in the area, come out and meet up with us at this event.  It'll be a great time!

You can find out more about this event here:
www.neatfair.org


Lastly, we wanted to mention that we will also be rolling out a Flite Test Podcast very soon! Stay tuned for that!

Thanks again for all of your support, and we hope to see some of you out at Neat Fair!! 

- Find this article & others like it at www.FliteTest.com -

Related Articles

FT Racer - BUILD

by FliteTest

FT - Slinger

by FliteTest

COMMENTS

Ben Presten on September 5, 2013
Floats common make floats for the swappables!!!!!!
Log In to reply
RCbacon on September 5, 2013
Make an edf swappable series :) And Viggen templates would also be nice :)
Log In to reply
planemad man on September 5, 2013
FLOAT PLANE PLEASE
Log In to reply
solarflash on September 5, 2013
Great job guys. I have been waiting to see anything about the airboat I spotted in a stack of your projects... Hope to see information about it before winter gets here. Would be neat to run this in the snow and if it is water worthy to run it in a small body of water. Keep up the good work. All of you should be considered for AMA hall of fame as far as I'm concerned.. Cannot think of anyone or group of folks that has done more to promote this great hobby/sport we call R/C.
Log In to reply
FlyingMonkey on September 5, 2013
PODCAST!!!
Log In to reply
Jimmy the Heater on September 6, 2013
For those that don't want to download iTunes to get the podcast or have a smartphone you can find it here for free and nothing to download.
http://podbay.fm/show/698727774/e/1378220298?autostart=1
Log In to reply
Flynn on September 5, 2013
Neat Fair! Nice! I hope to run into you guys and say "Thanks!"
Log In to reply
mike272 on September 5, 2013
Does anyone know what the coast for the Neat Fair is? Or do you need reservations to get in?
Log In to reply
Flynn on September 6, 2013
Mike, its East Coast. New York State. Shinhopple, NY to be exact. Here's a link to the spot.
www.nypeacefulvalley.com. It's a nice place. I went last year.
Log In to reply
mrscale on September 5, 2013
I was able to touch base with Josh and his replies with answer to my questions , among which was also the interest in the Saab Viggen as I see another reply earlier.
Great fun on the dollar store budget
Log In to reply
Flyers48 on September 5, 2013
Can you make a float plane for the swappable series
Log In to reply
28th St. Air on September 6, 2013
You need more cowbell ! :) That and a series of gliders that include options for high start, with high start bungee kit, and perhaps something like an Alula that can be discus launched.

Log In to reply
johnmustard on September 6, 2013
Dear Josh, could you please speak a little bit slowly? As I'm a foreigner-non-native-english-speaker I sometimes have dificulty to follow you. I may be speaking on behalf a lot of friends. Thank you very much!
Log In to reply
danield on September 7, 2013
I agree: my hearing aids don't go that fast, I noted in your up date, when you moved the mike right in front, much easier to understand, think there is less room, liveliness, less echo.
This is not a complaint, just noticed much easier to understand, outside, no problem.
Love what your doing, keep it up.
Hope floats are coming or skis, we get snow :)
Log In to reply
Fire1 on September 6, 2013
Viggen templates!!! Please!!! And a f22 raptor edf!!!
Log In to reply
amtpdb1 on September 8, 2013
I still would like to know what motors you used in the videos of each of these builds along with the prop sizes. I need to order motors and would like to order motors and props that you have proven to work.
Thanks
Log In to reply
Gravem on September 9, 2013
I would LOVE to see a foldable travel swappable! I live in a city and need to use public transport to get to where I can fly.
If there are any scratch builds out there that already fulfills my needs, please let me know :)
PS. You are doing an awesome job!
Log In to reply
Fire1 on September 9, 2013
Make more edf stuff!!!
Log In to reply
sawatt on September 11, 2013
Looking forward to seeing you guys at the NEAT fair. I'll be there on Friday by Noon....I will have a RCGroups Badge with my handle on it.
Log In to reply
TOMMY THOMPSON on September 13, 2013
I WOULD LIKE MORE INFO ON THE MOTORS ESC,S AND PROPS . YOU KIND OF SKIP RIGHT THROUGH THAT INFO LIKE WE ARE ALL EXPERTS, I AM AN OLD NITRO MAN AND NEW TO ELECTRICS. I HAVE BUILT THE BLOODY WANDER, AND THE BABY BLENDER, AND SCRATCH BUILT A SE5a WITH THE SPITFIRE WING TECNEK ,MY NEXT PROJECT IS THE 3D BUT I CANT FIGURE OUT THE MOTOR YOU ARE USING AND THIS PLANE NEEDS THE RIGHT MOTOR AND PROP TO WORK CORRECTLY. THANK YOU TOMMY
Log In to reply

You need to log-in to comment on articles.

FliteTest

(92)

Quick Update - September Events!