FTScratchBuild-Advanced
FT 3D Build Plans Available Here::
FT 3D - Swappable [ FULL SIZE ]
FT 3D - Swappable [ TILED ]
Click HERE to see the POWER POD BUILD VIDEO
3D Hobby Shop motor:
Omega 72g Brushless Outrunner
Equipment used in this build:
NTM Prop Drive Series 28-26A 1200kv / 250w
Hextronic 9 Gram Servo
TURNIGY Plush 25amp Speed Controller
FT Firewall
FT Control horns
1 mm piano wire (push rods)
3D Hobby Shop motor:
Omega 72g Brushless Outrunner
Additional/Alternate components:
Suppo 2208/14 1450kv Brushless Motor (Park 370 equiv.)
APC-style Electric Propeller - 8x4E
BLHeli Series 20amp Speed Controller
Suppo SP-90 9g Micro Servo
More details on electronics for your Speed Build Swappable Power Pod
The FT 3D foam board scratch build is another addition to the swappable fuselage series.
Be sure to check out some of the other scratch build tutorials before taking on this advanced scratch build.
A full list of the electronics and components is available here.
If you'd like to purchase the firewall and control horns used in this scratch build, check out our web store!
In the tail of the fuselage, it's a good idea to leave the slots in tact until your are ready to install your rudder.
This foam swappable features a tapered symmetrical wing design.
The two wings are connected with a balsa wood spar setup which has proven to be very strong, holding up after multiple crashes in our tests.
The removable canopy hatch is another advanced design that gives you access to your fuselage as well as creating a streamlined looking aircraft.
The CG of this airplane is directly above the front servo slot. The plans have everything detailed for you.
Check out more images and join the discussion in the forum post! CLICK HERE
And as we mentioned before the FT 3D is also available as a laser cut Speed Build Kit in our store.
CLICK HERE to learn more.
0 comments