projects
Vac Forming a Canopy
Vac Forming is a great way to make a very professional look canopy for your plane multirotor on anything you want to...
ARTICLES & GUIDES
TOPIC
TYPE
2033 articles · Newest first
projects
CTH Deep Reaper XL With shakes
This setup will fly for 30min+ 500Watts 4lbs Also for sale maybe?
projects
Deep Reaper XL Build 2012
Just a fast video of another wing that I've been looking at. So far so good3.9lbs 500Watts of power 8000mah 3s 10x10...
projects
Behemoth 69" FPV Wing
My Home made wing "Behemoth" 69" wingspanVery heavy 7+lbs. Motor is small for this but for the test is worked out...
projects
BusyBee TV - Scratch Build Troubleshooting (Part 1)
Part 2 will be up in 2 weeks due to my brother's Eagle Scout Ceremony. Don't forget to subscribe so you don't miss it!...
projects
Make a Cheap C.G. Stand
You will need:(1) 3/4" x 8' piece of PVC pipe, cut into the following pieces;12" x 28" x 26" x6(6) 3/4" PVC L-joints(2)...
projects
Bixler 2 motor upgrade
Here is a three part video I made for the Bixler 2 motor upgrade. There are three parts to the video and annotations...
projects
My very first build ever...
Well, here is my 1st step into the hobby. I had a Air Hoggs rc plane then a Vapor from parkzone and then micro cub....
projects
EPP FPV Landing test
Test my landing skills out. Just got a gopro. Let the good times roll!
projects
Stryker Air Frame - Bixler motor
I found that the HK stock Bixler motor works very well on a $19 Stryker air frame. 2200 3s Long flight times.
projects
Bixler FPV starter setup
This video I start getting in to FPV with baby steps. As I learn more about it, Im finding you just "Plug and Pray" =)...
projects
Hobbyking Yak 55 3D 1096mm EPP
Way too much power! Tons of pull and needs a slow fly prop. Fun 3D plane. Turnigy L3010B-1300 Brushless Motor...
Have a story to share?
Share your builds, flying experiences, and tips with the Flite Test community.