
Xaircraft X4 Drone
I'll start with the bill of materials for my Xaircraft Carbon Fiber X4 drone. For this build I planned to use higher...
TOPIC
TYPE
2033 articles · Newest first

I'll start with the bill of materials for my Xaircraft Carbon Fiber X4 drone. For this build I planned to use higher...

I came across this antenna design by HugeOne at FPVLAB. I found the antenna to be rather complicated to build as...

This is short video on how to modify the hk kk2.0 board into esc calibration mode hands free . this is especially...

This is a tutorial of how I flashed and setup my transmitter for use with MultiWii and Ardupilot, more information can...

In order to obtain more stable and responsive flight with my flight controller I decided to flash my four 30A...

in the video it was just test flying with all the equipment but not with FPV on! FPV Easystar build v1.0 Here we are...

Introduction In this article I am going to demonstrate what you need in order to build your own Quadcopter. This...
I puchased this pan/tilt camera mount from GoodLuckBuy.com and it did not come with instructions. It took me a while...

My dad designed this cool little foamy on his work bench and we've been having a blast with it.It combines the best...
Here is a short video on how I converted my Turnigy 9X transmitter to use a Zippy 1800mAH Li-Fe battery. Enjoy! RCJoseB
Here is a video I put together to show you how to put together the HK 5.8GHz 200MW FPV Kit and Super Simple OSD both...

Hey guys I know it's not a plane but I didn't have any props left after hitting the lamp pole on my delta wing so I...
Share your builds, flying experiences, and tips with the Flite Test community.