Product (7) Video (8) Articles (8) Forum (8)

Product Results

Video Results

Article Results

February 22, 2018 | | 18,452 Views

The Tiny Whoov has arrived! So what happens when you pit four of them against each other?

FliteTest

FliteTest (92)

Contributor

January 8, 2019 | 11,637 Views

This micro hovercraft, designed by the original Whoov team, is a powerful, fun-filled machine built for pure 'whooving'.

FliteTest

FliteTest (92)

Contributor

December 21, 2017 | 10,924 Views

I finally figured out an accurate, consistent and easy way of measuring the angle of my FPV camera tilt - here is how!

muteFPV

muteFPV (73)

Contributor

January 25, 2018 | 9,635 Views

Scratch build of my rc tinywhoov hovercraft !

alex@badassdrones

alex@badassdrones (61)

Contributor

November 30, 2022 | 8,828 Views

The Radiomaster T8 Lite is a great opening price point multirotor transmitter that can do double duty on a simulator.

FliteTest

FliteTest (92)

Contributor

March 19, 2018 | 8,366 Views

Looking to get a sweet new micro flyer to pilot both indoors and outdoors? Look no further.

FliteTest

FliteTest (92)

Contributor

November 30, 2022 | 7,128 Views

FT Tiny Whoop Brushless building steps

FliteTest

FliteTest (92)

Contributor

May 16, 2018 | 6,839 Views

FPV has been getting even more interesting recently. Check out this tiny RC car that works with a PS4 remote! Neat hu?

FliteTest

FliteTest (92)

Contributor

Forum Thread Results

3D Printed Tiny Whoop Case

This morning the case finished printing, to protect the FPV Done (Tiny Whoop). As well as the drone it's able to store the 1S Lipo Batteries. This makes it easier to take away for flying, all is needed 3 things. This Tiny Whoop case, Goggles and th...

3d Printed Tie Fighter 'Tiny Whoop' mod - flight video

First one I printed out of translucent blue PLA. 2nd one printed from Red ABS. Fun to fly! Fun to watch! [media=youtube]XZQ1yKodRrE[/media] [media=youtube]DAWthSRiTpA[/media]...

3d printing service (Tiny Whoops, TPU and More)

Orange filament is finally here, in both TPU and PETG for your stiff or flexible needs! (thank you slow boat from china). This translucent orange material looks great when hit by a little sunlight, distinguishing it from the errant traffic cone, a...

Auto - lvl on Tiny Whoop? For training

I am helping to start a drone racing club at my school. I suggested we order the Tiny Whoop package that comes with a Dxe transmitter and goggles so that we can use them on different builds in the future. Anyways, I was wondering if there was a way t...

BeeBrain Flight Controller - Tiny Whoop

Hellow everyone, so I'm having some trouble binding my BeeBrain FC to my DX6. I've tried holding the bind button on the FC, and holding it while plugging in the battery and my DX6 will not bind to the stupid thing! Also, Beta flight won't recognize t...

BeeCore FlySky AFHDS2 Flight Control Board for Inductrix/Eachine/Tiny Whoop

All, I have a completely unused BeeCore FCB for a Tiny Whoop. The FCB has the FlySky AFHDS2 integrated receiver. I picked it up with an Eachine micro quad, thinking I was going to buy a Turnigy transmitter, and then I landed a good deal on a Spekt...

Custom Tiny Whoop Build (I need Advice)

First off: I have a FlySkyI6 TX, and don't have the money to buy a different one. I also have a 250 quad and an Eachine QX70. My QX70 is really fun to fly, but it has it's quirks, its a little under powered, and incredibly fragile. (Held together b...

Fx797t/Hyperion 600 TVL tiny whoop camera won't power on

So, last summer I purchased the inductrix and Hyperion 600 TVL camera from the flite test store and built a tiny whoop. And just to give you an idea as to how much I use it.. Maybe 5 batteries a week at work is what I fly on average. So 7 months late...