Hi friends!
Over the last few months I've had a few people request some air-to-air footage. I wanted to share some video I had of my nnChipmunk v2. This footage is uncut and RAW. Hope you enjoy!
Filming a chase scene is one of my favorite things to do because of the coordination with another pilot. In this video I'm flyign with Frank from flywithfrank.com
This was one of the first flights with my nnChipmunk v2! We had to wait for the heavy rains to let up but it was worth it, look at all that green!
Footage was shot at my favorite place to fly in California - Baylands Park. If you're ever in the Bay Area make sure to check it out!
Great shot of the new Canadian canopy for the v2, it really comes to life when you build it with clear material.
This plane handles great at any speed. It's very stable in the wind and is a blast to fly.
Inverted flight is very stable with the v2, I can fly like this for an entire battery!
I'm working my way up to flying through quad race gates. Here I am flying through a narrow patch of trees with line of sight.
BUILD VIDEO
PLANS
BUILD KIT
SPECS
| WINGSPAN | 43in | 1100mm |
| FUSE | 30in | 762mm |
| CHANNELS | 4 |
| WEIGHT | Airframe - 305g |
| ELECTRONICS | Basic - Power Pack C MOTOR - Turnigy D3530/14 1100kv PROP - 9x6 APC ESC - Dynam 30a BATTERY - 2200mah 3S SERVOS - 4x 9g Speed MOTOR - Tacon Big Foot 10 1100kv 1100w or NTM 3548 1100kv PROP - 10x10 APC ESC - 80a Dynam SERVOS - 4x 12g metal gear 120 MPH - Heavy Duty 3300 4S 85 MPH - Zippy 2200 3s 40c |
| BUILD DIFFICULTY | Beginner – You’ve never flown a plane before, let alone done a scratch build Novice – You’ve flown a plane but have no experience with scratch building Intermediate – You’ve flown and built a few FT style planes before Advanced – You’ve mastered the standard FT build style and are looking for a new challenge Expert – You’ve mastered all build techniques and aren't afraid to improvise or tackle tedious builds This is a intermediate to advanced build. |
| PILOT SKILL | Intermediate |
| MATERIALS | 8 Plastic reinforcements 6 12" BBQ Skewers 5 Coffee straws 5 Control rods 5 Control horns 3 DTFB (20"x30") 1 Poster board 1 Clear plastic material (OPTIONAL) 1 Firewall 1 Aluminum 1/16" x 1/2" x 24" (Speedwing) or 1 Basswood 1/8" x 3 x 24" (Basic wing) |
Log In to reply
Log In to reply